CNG Conventional Kit is used in Carburator cars and Injection Cars made prior to 2010. It uses Venturi Principle to deliver Gas to Engine using an Air Gas Mixer. Emission is controlled by Idle Adjusting Screw and Power Adjusting Screw or Lambda Control System for close loop monitoring.

The core of this system is the Electronic Control Unit (ECU), which serves as the brain of the CNG conversion process. It gathers data from various engine sensors—such as throttle position, engine speed, and temperature—and adjusts the timing and quantity of gas injection in real time.

The injector rail in a CNG sequential system is meant to inject the controlled quantity of CNG fuel at specific intervals of time (as programmed in ECU). The programming is done in such a way that the petrol injectors and the CNG/LPG injectors perform identically.

This type of device is suitable for air or gas blocking and releasing controls, In gas power burners, atmospheric gas boilers, industrial kilns and others gas consuming appliances. Features The valves are made of aluminum alloy die-cast, with a wide range for inlet/outlet connections from 1/2in to 3in.

MAP sensors measure absolute pressure. Boost sensors or gauges measure the amount of pressure above a set absolute pressure. That set absolute pressure is usually 100 kPa. This is commonly referred to as gauge pressure.

The CNG filter cleans the CNG fuel and gets rid of the impurities within the fuel system. You will get rid of the impurities from the system thus maintaining a clean and proper combustion system.

A CNG (Compressed Natural Gas) wiring harness is a critical component in vehicles converted to run on natural gas. These harnesses serve as the electrical backbone of the CNG fuel system, connecting sensors, injectors, control units, and safety mechanisms. Designed for high durability and resistance to heat, vibration, and chemical exposure, CNG wiring harnesses ensure reliable communication between electronic components, optimizing fuel delivery, engine performance, and safety. The design and configuration of a CNG wiring harness depend on the vehicle type, engine layout, fuel delivery method, and regional emission standards. Below is a detailed breakdown of the most common types of CNG wiring harnesses used in modern automotive applications.

CNG cylinders are robust and highly secured mediums for storing compressed natural gas (CNG) with high pressure. These high-pressure seamless steel gas storage tanks are made from different metals or composite materials to endure a filling pressure of 150 to 300 bar.

A cylinder valve is a device for opening and closing and adjusting or controlling the flow of gas or liquid inside the cylinder.

The Remote TPRD (Thermal Pressure Relief Device) is designed to protect gas storage tanks in the event of a fire. It ensures rapid and spatially targeted tank discharge at elevated temperatures, while simultaneously preventing the tanks from bursting.

Dump Truck Hoist Bracket Hydraulic Cylinder With Bracket Hole

The cylinder head/cover acts as a cover for the combustion chamber thereby providing an enclosed space where the combustion can take place in the internal combustion engine. For two and four stroke engine the cylinder head/cover fulfills a different function.

High pressure pipelines are defined as conduits designed to transport fluids at elevated pressures, characterized by reduced diameter to minimize wall thickness and costs, and enhanced safety by limiting fracture surface and mass fluxes during potential ruptures.

Pipe clamps, or pipe fixings, are best defined as the support mechanism for suspended pipes, whether that be horizontal overhead or vertical, adjacent to a surface. They are vital in ensuring all pipes are fixed securely while also allowing for any pipe movement or expansion that may occur.

Couplings, fittings, and adapters allow industrial parts to connect and work together. For example, fittings allow piping to connect and help direct the flow of a plumbing system. Cam & groove couplers are available in assorted styles: reducing, standard, and flanged.

Low-pressure hoses are designed for applications with operating pressures lower than 300 psi. They are commonly used in general-purpose hydraulic systems.

The Filling Valve is a comprehensive system designed to provide precise control over fluid flow and pressure in various industries, including Automotive, Pharmaceutical, Cosmetic, Food, and Oil & Chemical.

Check valves are one-way or nonreturn valves that open with fluid movement and pressure, and close to prevent backflow of the pressure to upstream equipment such as pumps and compressors. In fact, check valves allow the fluid to flow in only one direction.

pressure gauge, instrument for measuring the condition of a fluid (liquid or gas) that is specified by the force that the fluid would exert, when at rest, on a unit area, such as pounds per square inch or newtons per square centimetre.

These valves are designed to release a controlled volume of fluid from within a system when a predetermined maximum pressure is reached, thereby reducing excess pressure in a safe manner.

Hight Voltage Fuse HRC Tension Fusible 3011054 250A Fusible for air & Gas-insulated Switchgear